Computer chair installation teaches you five easy steps

Computer chair installation teaches you five easy steps
After many friends bought a computer chair from the Internet, they sent a bunch of separate parts. At this time, they were dumbfounded and would not install it. There are some friends who want to move to take the computer chair apart, but don’t know how to take it apart. In fact, whether it is the installation of the computer chair or the disassembly and assembly of the computer chair, it is very simple. Here we will introduce it in detail.   1. Computer chair installation     1. First, place all the parts separately and place them well, so that they are not messy.  2. Then remove the screws on the back of the computer chair, and install the tray   3, and then install the wheels on the five wheels, just snap it directly on, very simple.  4. Then put the pressure bar up, and then buckle the computer chair tray and it’s basically finished.  5. After the construction is basically completed, the air rod can be adjusted up and down.  Second, computer chair disassembly and assembly   The design of the lifting rod is inverted cone shape, that is, it is directly plugged in during installation, without screws, welding and other means. Therefore, when disassembling, directly raise the air rod to the highest position (for easy access), and use a hammer to knock the chassis around the lifting rod, and it will automatically fall off (don’t knock one point all the time, a poor quality chassis is easy to knock. You can knock in circles). As long as you firmly believe that you will be able to come down, just hit it. The longer the chair is, the tighter it gets and it will be harder to knock.  The computer chair is indeed more comfortable and convenient to sit on, and it is very popular. After reading the installation method taught in this article, you can buy it online, but you must follow the steps.