Blister door production process

Blister door production process
1. Process flow of blister door panel:
Cutting-→milling-→sanding-→gluing-→secondary sanding-→coating and blister-→trimming and cleaning
2. Grinding and sanding and 2 grinding operations in the production process of plastic door panels
Fireproof board is attached to the back of the base material sanding board-→ electronic cutting saw cutting-→ milling-→ surface attaching refractory board-→ bending forming-→ edge banding completed
Edge banding also has advantages and disadvantages. In terms of technology, there are two types of edge banding: manual edge banding and machine edge banding. The machine edge banding is made by automatic sol wheel pressure bonding. It must use high-quality glue to achieve no glue line, no ripple, and never open glue. Good vision and feel. Manual edge banding is not the case. In terms of the origin of edge banding, high-quality edge banding is made of high-quality virgin materials, with excellent performance, non-opening, non-fading, and has the incomparable advantages of general edge banding. The high-quality edge banding is produced from original materials and can be recycled , It is an environmentally friendly material, and the seam between the sheet and the edge band is very delicate, and the arc chamfer is very smooth. Generally, the quality of edge banding tape and glue is not high enough, the hardness is relatively large, and the chamfering is not smooth, broken, and degummed. After the PVC waterproof edge banding process, Depot Dizani slotted into the aluminum alloy edge and handle with T-shaped barbs, which not only gave the fireproof board a super-epochal appearance in appearance, but also in quality. Reached a leap. This kind of process is complicated and only a few domestic manufacturers produce it.