Brick cabinet practice

Brick cabinet practice
Brick cabinets are a good thing, strong, durable and worthy of promotion. Including door panels and countertops are the same as the overall cabinet, which requires the designer of brick cabinets to have some common sense of overall cabinet design. There are many ways to build brick cabinets, and masons also have their own preferences. The craftsmanship should consider many aspects such as firmness, beauty, convenience, and economy. The column can be used with 2 pieces of vitrified bricks, 1cm cement, and external edge sealing. 3cm vitrified brick strip (marble glue bonding) The top layer of the cabinet body is supported by a 3cm wire casting layer (including 8mm steel bars), and the space between the countertop and the top layer is filled with plain cement or putty, and between the cabinet body and the top layer Connected with cement and steel bars, there must be room for kicks. People who cook for a long time need this thing. It is necessary to drill holes when installing the door. It is recommended to use a glass drill bit, spray water, and drill slowly. In fact, after understanding the craftsmanship, I can completely guide the masons to complete the entire construction process. Of course, many people have completed their own brick cabinets by themselves. Building cabinets requires bricks, cement, sand, stones, steel bars with a diameter of 6 mm, and ceramic tiles. Cement, sand and water are mixed with synthetic cement mortar to build bricks into a brick wall, and put prefabricated reinforced concrete partitions. If you want to install the cabinet door, you must pre-bury wooden blocks on the brick wall, and finally veneer with tiles. Press the cabinet door and it’s fine