Details of cabinet measurement: 1. It is best to measure the length twice, from left to right and from right to left, so as not to misread the size the first time. 2. When measuring the height of the suspended ceiling (ceiling decoration effect drawing), measure the quasi-height points in several different directions and check whether there are beams under the gusset. 3. When measuring, look at the waistline, the height of the bottom of the motorized socket to the floor tile, and the height of the window (more importantly when retesting, and attention when measuring). 4. When measuring, measure the distance and height of the gas meter and pipe from the wall, the height of the flue, the height of the water inlet and outlet, the main drain, the distance from the wall, the height of the socket (when retesting), etc.

5. When measuring, check whether there are steps on the ground, whether there are concave and convex beams on the wall, and when making wall cabinets by the windows, you must consider the pulling of the screens to avoid the situation that the cabinet doors are not easy to open. 6. When retesting, the floor tiles should be laid and the wall tiles should be pasted. If the wall cabinet or high cabinet is on top, the ceiling can be retested. 7. It is best to choose the fixed point and measure the diagonal when measuring special shapes or polygons. When making cabinets (ground, wall cabinets) on both sides against the wall, measure the inside and outside distances.

8. When there are poor bricks, measure the distance and height from the wall (including the height from the bottom and the top to the ground). It is better to leave 700mm long for normal refrigerators, plus extra length for special ones. 9. Where there is a door cover, measure the thickness of the door cover (including lines), or allow the sliding door to be opened and leave a gap of 10-20mm for the floor or wall cabinet with sliding door. 10. When measuring the kitchen of the unit (kitchen decoration renderings), pay attention to asking if the wall is a stone plywood wall, so that the wall cabinet cannot be installed.

Precautions for cabinet measurement: 1. When selecting materials, pay attention to selecting high-quality plates, paying attention to issues such as environmental protection, bearing capacity, resistance to deformation, nail holding power, and easy scrubbing. 2. Pay attention to the construction of detailed parts such as veneer and edge sealing. 3. Pay attention to the installation of hardware accessories. 4. Try to simplify the lines when making, and pay attention to the shape.

5. Pay attention to the details of the internal hydropower facilities, such as the hiding of pipelines and the use of space. Cabinet measurement method: start measuring clockwise at the door of the kitchen, and start measuring at the door of the kitchen (please select a vertical/horizontal blank plan drawing based on the housing situation). Follow these steps to gradually draw the basic graphics in the kitchen and mark the corresponding positions of the doors and windows. 1: Measure the distance from the left side of the window to the left wall;

2: Measure the distance from the right side of the window to the right wall or column; 3: Measure the height of the window; 4: Measure the height of the window sill from the ground; 5: Measure the height of the floor. The above is recorded in the drawing. When measuring the kitchen, the gas meter and main power switch must be positioned. 1: Gas meter height positioning —— what is the distance between the upper and bottom of the gas meter and the ground (1650-2100 mm); 2: Gas meter horizontal positioning —— the left side of the gas meter to the left column What is the distance (wall)? What is the distance between the right side of the gas meter and the left column (wall) (340 mm).

3: Positioning the height of the main power switch-what is the distance between the upper and bottom of the main power switch and the ground (1150-1400); 4: Positioning the main power switch horizontally-the distance between the right side of the main power switch and the right pillar ( What is the distance from the wall (250); what is the distance from the left side of the main power switch to the right column (wall) (400). The position of the main power switch and the gas meter will affect the position of the hood. So these two positions must be positioned.

Conditions for cabinet measurement: 1. It is best to measure the length twice, from left to right and from right to left, so as not to misread the size the first time. 2. When measuring the height of the suspended ceiling, measure several quasi-height points in different directions and see if there are beams under the gusset. 3. When measuring, look at the waistline, the height of the bottom of the motorized socket to the floor tile, and the height of the window (more importantly when retesting, and attention when measuring).

4. When measuring, measure the distance and height of the gas meter and pipe from the wall, the height of the flue, the height of the water inlet and outlet, the main drain, the distance from the wall, the height of the socket (when retesting), etc. 5. When measuring, look at whether there are steps on the ground, whether there are uneven beams on the wall, and the pull of the screen window should be considered when building the wall cabinet by the window. If it is related to the cabinet, the relevant size should be measured. 6. When retesting, the floor tiles should be laid and the wall tiles should be affixed. For example, when the wall cabinet or high cabinet is on top, the ceiling must be lifted to retest.

7. It is best to choose the fixed point and measure the diagonal when measuring special shapes or polygons, and measure the inner and outer distances when the two sides are against the wall to make the cabinet (ground, wall cabinet). 8. When there are poor bricks, measure the distance and height from the wall (including the height from the bottom and the top to the ground). It is better to leave 700mm long for normal refrigerators, plus extra length for special ones. 9. Where there is a door cover, measure the thickness of the door cover (including lines), or allow the sliding door to be opened and leave a gap of 10-20mm for the floor or wall cabinet with sliding door. 10. When measuring the kitchen of a unit, pay attention to asking if the wall is a stone plywood wall, so that the wall cabinet cannot be installed.