Epoxy floor construction process step one: epoxy primer
1. Make sure the ground is clean before construction, and remove any debris that adheres.
2. Mix the epoxy resin and curing agent in the correct ratio.
3. After mixing evenly, apply it with a scraper or roller.
4. Requires soaking to strengthen attachment.
5. Apply the epoxy middle coat after the first drying.
Epoxy floor construction process step 2: epoxy middle coating
1. Make sure the ground is clean before construction, and remove any debris that adheres.
2. Mix the epoxy resin and curing agent according to the correct ratio, and add a certain amount of quartz according to the ratio.
3. After mixing the sand evenly, pour it on the ground. Use a trowel to spread the material evenly according to the designed thickness to increase the strength and impact resistance; make the ground stronger and compressive.
4. After the intermediate coating is dry, use sanding to smooth the sags and particles on the surface.
5. Clean the dust.
Epoxy floor construction process step 3: epoxy putty layer
1. On a clean ground, stir the epoxy resin and quartz powder in the correct ratio, and then use a batch knife to evenly scrape on the ground to increase the combination between the middle coat and the surface layer and further adjust the ground The flatness.
2. According to the actual number of construction passes, it is required to be flat and without holes, without batch knife marks and sanding marks.
Epoxy floor construction process step 4: epoxy top coating
1. Keep it clean before construction, and remove any debris that adheres.
2. Stir the B component of the top coating material evenly; then add the curing agent to mix and stir well.
3. Use a roller to evenly coat the material;
4. After the first coat is dry, apply the second top coat.
5. Scrape the trowel again with a trowel
6. Pay attention to the treatment of the junction of successive construction; the coating is required to be uniform and no sagging.
2020-09-27