Four-door wardrobe installation

Four-door wardrobe installation
Installation steps of sliding track door wardrobe for four-door wardrobe installation
1. Prepare installation tools, Phillips screwdriver, newspaper or cardboard box, etc. and spread on the ground.
2. Count out the classification of each board. If you have separate drawers and clothes racks, you can assemble them first and put them aside.
3. First find out the four base combination boards and base plates, screw in the black screw links, tighten the screws, and fix the floor and the base together. Then screw the prepared black screws and metal screws into the screw holes of the base, and screw the middle side plate and back plate into the corresponding positions at the same time.
4. Put the side panel of the cabinet body in the middle first, then put the back panel on the ground, then connect the two panels together with screws and tighten them. At the same time, put the other partitions in other wardrobes and connect them, paying attention to the direction of the partitions and the place of the grid. The cabinet body is almost installed. Then connect the base to the cabinet body with screws, tighten the screws, and then install the drawers.
5. After installing the cabinet, fix the up and down rails on the base and top.
6. Put the door into the track like a window. This kind of wardrobe is a little harder to install, but it actually looks taller in life, and it’s easy to use.
Installation steps of spring hinge door wardrobe for four-door wardrobe installation
1. Prepare installation tools, Phillips screwdriver, newspaper or cardboard box, etc. and spread on the ground.
2. Count out the classification of each board. If you have separate drawers and clothes racks, you can assemble them first and put them aside.
3. First find out the four base combination boards and base boards, screw in the black screw links, tighten the screws, and fix the floor and the base together. Then screw the prepared black screws and metal screws into the screw holes of the base, and screw the middle side plate and the back plate into the corresponding positions at the same time.