The upgrading of hardware sanitary ware has gone through some functional improvements. After the stage of pursuing beauty, it is entering a new stage of not only meeting functional requirements, but also considering energy and water conservation. Hardware sanitary ware generally has the following types: 1. Basin: It can be divided into three types: hanging type, column type and desktop type. 2. Toilets: can be divided into two categories: flush type and siphon type.
Precautions for the installation of hardware sanitary ware: 1. When installing, determine the location of water pipes and wires according to waterways and circuit diagrams. Be sure to avoid water pipes and wires to prevent breaking water pipes and breaking wires. 2. When installing on the surface of the ceramic tile, first use glass drills to penetrate the ceramic tile, or use a steel nail or hammer to gently knock the ceramic tile through, and then use an electric hammer to empty it to avoid breaking the ceramic tile. 3. The tools should not directly touch the hardware during installation, and should be wrapped with a clean soft cloth before tightening. 4. For various faucets or mixers, try to install stainless steel covers.
The installation method of hardware sanitary ware: 1. The installation of the handle: the installation of the handle should be ergonomic and convenient to use. All the handles of the same wardrobe must be neat and consistent during installation. The length of all screws should match the thickness of the cabinet door and drawer surface. When opening a hole with an electric drill, the hole size should be the same as the screw diameter. 2. Installation of door hinges: Generally, two hinges with a length of 100mm are installed on the door. If it is a solid door or a concave-convex shaped door, three hinges must be used, or two hinges with a length of 125mm must be installed. 3. Installation of the lock: the distance between the handle of the door lock and the ground should be between 900-1000mm after installation. When installing, first install the lock body and the bolt so that the bolt plate is flush with the door edge, close the door, fix the position of the lock plate, and then install the lock plate and ensure that the lock plate is flush with the door cover.