Precautions for house renovation design

1. First of all, attention should be paid to the preliminary design. Houses that need to be renovated are usually because the current state of decoration cannot satisfy the occupants’ pursuit of quality of life. The focus is on storage and aesthetics. Especially the storage space in the bedroom or balcony that cannot be used reasonably, and the decoration of the existing living room, dining room, kitchen and bathroom is too old. Therefore, the early design should focus on the increase in storage functions and the design of decoration style. In this way, we can save some locations that do not need to be changed as much as possible and reduce the cost of decoration.
2. Wall construction is a point that needs special attention. Before refurbishing the old wall, it is necessary to do the basic treatment of the wall. Try to remove the original wall as much as possible. Only by refinishing and basic treatment, and then applying latex paint can the new wall be firm. Many owners hope to save costs as much as possible when renovating old houses, and only repair and deal with parts of them. Although it can save a sum of money temporarily, it will take time and money to make corrections after a long period of time and wall problems.
3. It is very important to remove the wall tiles in the kitchen and bathroom, and level the surface. The leveling of the kitchen and bathroom walls is often a link that owners tend to ignore. When calculating the cost of the wall after the old house is demolished, we will tell the owner that there is a cost to make up. However, for some houses, the developer’s basic wall surface is relatively poor, and the flatness of the wall after patching is not high. If the owner has high requirements for the effect after the tile is pasted, the wall leveling work is required. Although not all owners of old house renovation will encounter or need this work, the construction party is obliged to inquire in advance whether the ceramic tiles purchased by the owner have special requirements for the flatness of the wall to avoid unnecessary misunderstandings after the start of construction.