Shop wallpaper

Paving wallpaper details: 1. Fireproof, explosion-proof and anti-virus in the dry season: the wood, carpet (carpet decoration rendering), fabric, paint and other materials used in the decoration are all flammable materials. The country has set strict standards and must follow the standard level According to the requirements to match the decoration materials. The indoor ceiling (the effect drawing of ceiling decoration) should be made of fire-proof materials, and the wall, floor and base should be made of fire-proof or non-combustible materials to minimize the risk of fire.

2. Pay attention to ventilation to prevent cracks: in dry weather, avoid placing wood in the vents and seal the surface as soon as possible. Because the large core board, veneer, etc. are placed in a location with strong ventilation, the temperature and humidity on both sides of the wood will be different, the nature will become unstable, and the moisture in the wood will be quickly lost, causing dry cracks on the surface, small cracks, etc. phenomenon.

The Xianyang urban home decoration designer reminded the public that high-end decorative panels must be sealed with oil to lock the moisture in the wood. 3. To prevent the deformation of the wallpaper, it needs to be moisturized: In recent years, wallpapers with a variety of colors have been favored, but in the dry season, the wallpaper must be filled with water, and the wallpaper must be soaked in water before paving, and then brushed Glue shop paste. After paved, the doors and windows (door and window decoration renderings) cannot be opened to let the wall dry quickly. In this way, it is very easy for the newly paved wallpaper to be dried by “drafting wind” and lose water and deform. Therefore, the walls with wallpaper and wall coverings should be naturally dried in the shade.

Precautions for paving wallpaper: 1. When scraping the wallpaper with a scraper, it is not advisable to use too much force to avoid scratching the wallpaper. 2. Don’t throw away the remaining wallpaper immediately, save the larger area for later use. 3. After the wallpaper is pasted, close the doors and windows and let it dry naturally.

How to pave the wallpaper: 1. Before pasting the wallpaper, check whether the color of the wallpaper is the same, mainly depending on the color number and batch number. Check the contrast of the wallpaper again to see if it is construction in the forward direction or in the opposite direction. 2. Blend the glue. The quality of glue directly affects the service life of the wallpaper. The degree of glue blending will also affect the speed and overall effect of construction. The concentration of glue blending is based on whether a chopstick can stand in the glue. 3. Start the sticker.

Cut the wallpaper according to the height of the wall, apply glue evenly on the back of the wallpaper, and paste the wallpaper on the wall in a vertical direction from top to bottom. Then gently scrape the wallpaper with a scraper until there are no bubbles or wrinkles. 4. Prepare a dry towel and wipe the excess wallpaper glue on the wallpaper by the way to prevent the surface of the wallpaper from being polluted. Follow the above method to paste the wallpaper throughout the room in turn. 5. After pasting the wallpaper, close the doors and windows for 2-3 days to let the wallpaper dry naturally. At this time, remember not to turn on the air conditioning, heating and other equipment to prevent the wallpaper from shrinking and causing leaks.

Paving wallpaper conditions: 1. Check the wall: make sure that the wall is dry and flat without falling off and bulging. The cracks in the cavities are patched and smoothed with gypsum powder and cleaned as much as possible. When updating the wallpaper, you only need to uncover the corner of the surface of the old wallpaper and then peel it all off, leaving the paper base on the wall. If the paper base is firmly bonded to the wall, the new wallpaper can be directly mounted on it to prevent the seam of the new wallpaper from colliding with the seam of the old paper.

2. Bounce line angle: Before pasting the wallpaper, bounce the line first. The bounce line is to bounce the horizontal and vertical lines on the processed base layer, and try to keep the same angle as the doors and windows. 3. Cut paper size: After measuring the height from the top to the bottom of the wall, cut the paper on the ground, and add a 5cm margin according to the wall height. It can be cut directly if there is no parquet. The parquet must be cut according to the requirements. The second parquet is longer than the first.

4. Brush the glue evenly: evenly brush the glue on the back of the cut wallpaper. Both sides should be brushed enough, folded and pressed together on both sides, so that the glue can fully penetrate the back of the paper, and it can be applied in 5 minutes. For wall use, paint several wallpapers each time and post them in sequence. In order to ensure the firmness of the paste, the back of the wallpaper and the wall should be brushed with glue, and it is required to brush evenly. 5. Mounting sequence: There are two types of paper tape edge butt pasting and tailor pasting.

First, paste the upper part of the wallpaper, use a scraper to level from top to bottom, from the middle to both sides, squeeze out bubbles and excess glue to make the wallpaper flat and tight Pasting on the wall, it is forbidden to seam at the yin and yang corners, it is best to wrap the yang corner 20 mm. Align the flowers first and then sew them. 6. Detection effect: Finally, use a wallpaper knife to cut off the excess wallpaper and wipe off the glue. The closing criterion is that there is no obvious seam on the wallpaper from 1.5 meters away.