Waterproof plugging repair

There are three points for waterproofing leaks. The first is roof leaks, the second is walls, and the third is indoor floors. If there is water leakage on the roof (the sky), the traditional method is to use a roll material similar to asphalt, but everyone knows that this stuff is not environmentally friendly and is most inappropriate for families with elderly, children or pregnant women. Asphalt cannot withstand wind and sun, heat expansion and contraction, and will start to leak again over time.   If the indoor floor is leaking, the traditional method is to pry the tiles, dig the waterproof layer, and redo the waterproof. The biggest advantage is that if the work is done carefully, the effect is good. But the process is very time-consuming, labor-intensive and expensive! Let’s take a look at a simple method.  Tools   a bottle of CPC leak-proof agent, a brush   method    1. When the weather is clear, ensure that the building itself is dry. (It won’t work if it rains. If the building itself is not very dry, you can blow it against the wet place with a hair dryer.)    2. Check if there are any obvious gaps in the leaking area. If there is, fill it with cement. , Wait for it! If not, don’t care.  3. Use a brush to apply directly to the leaking part of the building, just once. Do not splash water to the painted part within 12 hours. After 12 hours, the house leak problem was completely solved.
Fourth, waterproof plugging maintenance precautions     1. Can not be applied on rainy days, so-called precautions, it cannot be used temporarily when it rains.  2. You can apply it when the building is dry. If the building itself is wet, the effect will be discounted.   3, 12 hours can not pour water into the construction area.