What are the steps for waxing wooden floors

Wood floor waxing steps 1. Choose fine weather to wax: If the humidity is too high in rainy days, waxing will produce white turbidity. When the room temperature is below 5 degrees, the floor wax will harden. Before waxing, please do not use rags containing chemicals to wipe the floor, which will cause poor adhesion of the floor wax.
Wood floor waxing step 2. Remove the garbage and dirt on the floor surface: Use a vacuum cleaner to remove the garbage and dust on the floor surface, and use the diluted neutral detergent to wipe the stains on the floor. The stains that are difficult to remove can be wiped with water. In order to prevent the detergent from accumulating in the groove, the cloth soaked with detergent should be wrung out as much as possible. Floor wax remover will cause stains and swelling on the floor, so it must not be used.
Wood floor waxing step 3. Waxing: Shake down the container with floor wax, and stir well. Use a clean cloth or sponge to fully dip the floor wax, as the standard is not dripping. Shake and fully stir the floor wax evenly. You can try it locally at the unobtrusive place, and then wax the whole after confirming that there is no abnormality. Then use a clean rag or a special waxing dust pusher to fully dip the wood floor wax, and apply it carefully according to the wood grain direction of the wood floor. The speed should not be too fast, and the coating should not be missed or the thickness is uneven. Keep the thickness even.
Wood floor waxing step 4. Before the floor wax is dry, do not walk on the floor: it usually takes 20 minutes to 1 hour to dry. If there is any omission, it must be repainted. If you use waxing twice, the second application should be done after the first time is completely dry, and waxing once every 6 months can keep the floor beautiful for a long time.
Wood floor waxing step 5. Polishing: Generally, it will be done twice, after the first time, then wax again. Each waxing process must wait for the upper layer of wax to dry before adding a layer of wax. After it is completely dry, polish the surface with fine sandpaper or a soft cloth.